Key Features

3rd Generation State-of-the-art, high efficiency ICEpower power amplifier, which is compliant with THX Ultra2 Plus, or better.

Internal selectable mains: 115 Vac or 230 Vac (Japan also supported).

Up to 6 x 290 Watt RMS into 4 ohm.

Up to 30 Ampere current output per channel.

112 dBA dynamic range.

Upper bandwidth limit (-3dB): 120 kHz

Lower bandwidth limit (-3dB): 1,5 Hz

THD+N = 0.002% @ 1W (8ohm, 1kHz)

It will never exceed the temperature of the human body.

Gold-plated next-gen WBT loudspeaker binding posts,
which accept spades and banana plugs.

Gold-plated single-ended RCA inputs.

eAR 256 3G-WBT comes with the new 3rd Generation State-of-the-art, high efficiency ICEpower, which is based on the patented HCOM modulation and MECC control techniques. It is a distortion-free power amplifier that put out 6 X 250 watts (RMS) at 4 ohms. It can drive impedance spikes below 3 ohms and will never get hotter than body temperature. Under normal listening conditions it consumes an average/a maximum of 20 watts, and while idling, only a few, so electric bills and global warming are not matters for concern here. Its inputs and next-gen WBT speaker terminals are gold-plated and it is built for trouble-free performance.

The eAR® 256 3G-WBT is unflatteringly honest. It will not cover up the deficiencies of a badly engineered recording or mediocre or poorly balanced equipment. It will not glamorize. It will simply and truthfully amplify the signal that is going into it, and if that signal is a poor signal, the signal reaching your speakers will not be any better. But if the recording is good and the rest of your equipment has been chosen wisely, this small, multichannel amplifier will exceed whatever legitimate expectations you may have.

Acoustic Realitys power amplifiers meet all international safety standards and can be sold all over the world.

Note: Due to several hundred different types of main plugs the eAR 256 3G-WBT comes without a power cord.